I-C11000 vs C10200 Ithusi: Umehluko Oyinhloko, Izakhiwo kanye Nomhlahlandlela Wokusebenza Ophelele

Isingeniso

Ukukhetha i-alloy yethusi efaneleKubalulekile kakhulu ekusetshenzisweni kwemishini kagesi, ukushisa, kanye nokunemba. Ngenkathi i-C11000 (ithusi le-ETP) kanye ne-C10200 (ithusi elingenawo umoya-mpilo) zibukeka zifana kakhulu futhi zombili zinikeza ukuhanjiswa okuhle kakhulu, umehluko wazo kokuqukethwe komoya-mpilo, ukusebenza kokushisela, ukuhambisana kwe-vacuum, kanye nezindleko kungathinta kakhulu impumelelo yephrojekthi yakho.

Kulesi siqondisi esiphelele, sichaza konke okudingeka ukwazi ngakhoI-C11000 vs C10200ithusi — kusukela ekwakhiweni kwamakhemikhali kanye nezakhiwo zemishini kuya ekusetshenzisweni kwangempela kanye nokucatshangelwa komshini we-CNC. Kungakhathaliseki ukuthi uklama izingxenye zikagesi, izinhlelo ze-vacuum, noma izingxenye ezinembe kakhulu, lokhu kuqhathanisa kuzokusiza ukuthi ukhethe izinto ezifanele.

Okuqukethwe

• Iyini i-C11000 Copper (ETP Copper)?
• Iyini i-C10200 Copper (i-Copper Engenayo i-Oxygen)?
• I-C11000 vs C10200: Ukuqhathaniswa Kohlangothi Ngalunye
• Izicelo: Isikhathi Sokusebenzisa I-Alloy Ngayinye
• Izinto Okucatshangelwayo Ngemishini Ye-CNC
• Ungakhetha Kanjani: C11000 noma C10200?
• imibuzo ejwayelekile ukubuzwa
• Isiphetho

Kuyini i-C11000Ithusi(ETP Copper)?

C11000, obeye aziwe njengoIthusi le-Electrolytic Tough Pitch (ETP), iyi-alloy yethusi esetshenziswa kakhulu emhlabeni. Ibizwa ngokuthi i-UNS C11000 futhi ngezinye izikhathi ibizwa ngokuthi i-CDA 110 noma i-pure copper grade 110.

Ukwakheka Kwamakhemikhali kwe-C11000

• Ithusi (Cu):Ubuncane obungu-99.90% (kufaka phakathi isiliva)
• I-oksijini (O):0.02% – 0.05% (ngokuvamile 200-500 ppm)
• Isiliva (Ag):Kubhekwa njengengxenye yokuqukethwe kwethusi ezinhlotsheni eziningi
• Okunye ukungcola:Amanani okulandelela, alawulwa ngokuqinile

Izakhiwo Eziyinhloko ze-C11000 ETP Copper

• Ukuqhuba kukagesi: ≥ 100% IACS (International Annealed Copper Standard), evame ukufinyelela ku-101-101.5% IACS
• Ukuqhuba kwe-thermal:Cishe 398 W/(m·K) ekushiseni kwegumbi
• Ubuningi:8.94 g/cm³ (0.323 lb/in³)
• Indawo yokuncibilika:1,083°C (1,981°F)
• Amandla okunamathela (ahlanganisiwe):210-220 MPa
• Ukwelulwa (okuhlanganisiwe):Ubuncane obungu-40%

I-C11000 ikhiqizwa ngokuhluzwa kwe-electrolytic kulandelwe yi-oxidation elawulwayo ukuze kufezwe okuqukethwe kwe-oxygen okufiswayo. I-oxygen ekhona ngesimo sezinhlayiya ze-cuprous oxide (Cu₂O) isiza ukuthuthukisa izakhiwo ze-alloy mechanical ngaphandle kokunciphisa kakhulu ukuhanjiswa kwe-conductivity.

Okubalulekile: Ithusi le-C11000 ETP liyinsiza yokusebenza embonini — linikeza ukuhanjiswa okuhle kakhulu ngentengo encintisanayo. Liyisinqumo esizenzakalelayo sezinhlelo zokusebenza eziningi zikagesi nezokushisa ezisetshenziswa kabanzi.

Iyini i-C10200 Copper (i-Copper Engenayo i-Oxygen)?

C10200, obeye aziwe njengoIthusi Elingenawo Umoya-mpilo (OF)noma ithusi le-OFHC (Oxygen-Free High Conductivity), liyizinga lethusi elihlanzekile kakhulu elikhiqizwa ngaphansi kwezimo ezilawulwa ngokuqinile ezingenawo umoya-mpilo. Igama layo le-UNS yi-C10200, futhi libizwa nangokuthi i-CDA 102.

Ukwakheka Kwamakhemikhali kwe-C10200

• Ithusi(Cu):Ubuncane obungu-99.95% (kufaka phakathi isiliva)
• I-oksijini (O):Umkhawulo ophezulu ongu-0.001% (≤ 10 ppm) — cishe awunawo umoya-mpilo
• Azikho izinto zokususa i-oxidative:Kukhiqizwe ngaphandle kwe-phosphorus noma ezinye izinto ezisusa i-oxidation
• Ukungcola okuphelele:Kuphansi kakhulu, kuqinisekisa ubumsulwa obukhulu

Izakhiwo Eziyinhloko Zethusi Elingenawo Umoya-mpilo le-C10200

• Ukuqhuba kukagesi:101-102% IACS — iphakeme kancane kune-C11000
• Ukuqhuba kwe-thermal:Cishe 401 W/(m·K) ekushiseni kwegumbi
• Ubuningi:8.94 g/cm³ (0.323 lb/in³)
• Indawo yokuncibilika:1,083°C (1,981°F)
• Amandla okunamathela (ahlanganisiwe):220-260 MPa
• Ukwelulwa (okuhlanganisiwe): ≥ 40%
• Ukumelana nokuqhekeka kwe-hydrogen:Kuhle kakhulu — akukho bungozi bokuqhekeka kwe-hydrogen

I-C10200 ikhiqizwa ngokuncibilikisa nokuphonsa ama-cathode ethusi ahlanzekile kakhulu endaweni elawulwayo, engenawo umoya-mpilo (ngokuvamile kusetshenziswa izembozo ze-graphite noma zamalahle). Le ndlela yokukhiqiza isusa umoya-mpilo ngokuphelele, okuholela ethusini elihlanzekile kakhulu kanye nokuthembeka kwezicelo ezibalulekile.

Okubalulekile: Ithusi elingenawo umoya-mpilo i-C10200 linikeza ukuthembeka okuphezulu ezindaweni ezibucayi kakhulu — amazinga okushisa aphezulu, izimo ze-vacuum, kanye nezimo ezicebile nge-hydrogen. Kuyisinqumo esingcono kakhulu uma ukwehluleka kungeyona inketho.

I-C11000 vs C10200: Ukuqhathaniswa Kohlangothi Ngalunye

Manje ake siqhathanise lawa ma-alloy amabili ethusi kuzo zonke izinhlaka ezibalulekile. Ukuqonda lo mehluko kuzokusiza ukuthi ukhethe okulungileizintongesicelo sakho esithile.

1. Ukuqhathaniswa Kokwakheka Kwamakhemikhali

2. Ukuqhuba Ugesi Nokushisa

Nakuba umehluko wokuqhuba ugesi ubonakala umncane (cishe u-1%), ungaba mkhulu ezinhlelweni zokusebenza ezinamandla aphezulu noma ezivame kakhulu lapho yonke ingxenye yokusebenza kahle ibalulekile.

3.OkwemishiniIzakhiwo

4. Okuqukethwe yi-oksijini kanye nokuqhekeka kwe-hydrogen — Umehluko Obalulekile

Umehluko obaluleke kakhulu phakathi kwe-C11000 ne-C10200 usekusebenzeni kwabo.okuqukethwe komoya-mpilokanye nendlela abaziphatha ngayo ezindaweni ezicebile nge-hydrogen noma ezishisa kakhulu.

Ukuqhekeka kwe-hydrogen ku-C11000

Uma ithusi le-C11000 lishiswa ngaphezu kuka-370°C (700°F) emoyeni oqukethe i-hydrogen (umkhathi onciphisayo), i-hydrogen isabela nomoya-mpilo okwithusi ukuze yakhe umhwamuko wamanzi (H₂O). Lo mhwamuko wamanzi udala ingcindezi yangaphakathi emingceleni yokusanhlamvu, okubangela:

• Ukuqhekeka nokuqhekeka kobuso
• Ukulahlekelwa ukuguquguquka nokuqina
• Amandla emishini ancishisiwe
• Ukwehluleka okungenzeka kwengxenye

Lesi simo saziwa ngokuthiukuqhekeka kwe-hydrogennoma "isifo se-hydrogen" ethusi. Kuyinkinga enkulu ekushiseni, ekubhakeni, nasekusetshenzisweni kwezinga lokushisa eliphezulu.

Akukho Ukuqhekeka Kwe-Hydrogen ku-C10200

Ngenxa yokuthi i-C10200 ayinawo umoya-mpilo (≤ 10 ppm), ayikho into i-hydrogen engasabela ngayo. Lokhu kwenza i-C10200 ibe:

• Ukungavikeleki ekuqhekekeni kwe-hydrogenkunoma yiliphi izinga lokushisa
• Kuphephile ukushisela kanye nokubophaku-hydrogen noma emoyeni onciphisayo
• Kuhle kakhulu ekusetshenzisweni kwezinga lokushisa eliphezulu
• Kufanelekela izindawo zokuhlanza umoyalapho ukukhishwa kwegesi kumele kuncishiswe khona

Umehluko Obalulekile: I-C11000 ingahlushwa ukuqhekeka kwe-hydrogen uma ishiswa ngaphezu kuka-370°C ezindaweni ezishisayo ze-hydrogen. I-C10200 ayivikelekile ngokuphelele. Uma ukusetshenziswa kwakho kuhilela ukushisela okushisa okuphezulu, ukushiswa kwe-brazing, noma izindawo zokuhlanza umoya, i-C10200 ivame ukuba yisinqumo esiphephile kuphela.

5. Ukusebenza Kokushisela Nokubhinca

6. Ukuhambisana kwe-Vacuum

Ngezicelo ze-vacuum, i-C10200 ingcono kakhulu:

• C10200:Izinga eliphansi kakhulu lokukhipha igesi — lilungele izinhlelo ze-vacuum ephezulu kanye ne-ultra-high-vacuum (UHV). Ukungabikho komoya-mpilo kusho ukungabikho kokwakheka kwe-volatious oxide ngaphansi kwe-vacuum.
• C11000:Ingakhipha umoya-mpilo kanye nokunye ukungcola ngaphansi kwezimo ze-vacuum, ingcolise indawo ye-vacuum. Ngokuvamile ayinconywa ekusetshenzisweni kwe-vacuum ephezulu.

7. Ukuqhathaniswa Kwezindleko

Izindleko zivame ukuba yisici esinqumayo. Nakhu ongakulindela:

• C11000:Ithusi elinomoya ophakeme elingabizi kakhulu. Izindleko zokukhiqiza eziphansi ngenxa yenqubo yokukhiqiza elula.
• C10200:NgokuvamileKubiza kakhulu ngo-15-25%kune-C11000. Izindleko eziphakeme zibonisa inqubo yokukhiqiza engenawo umoya-mpilo eyinkimbinkimbi kanye nezidingo zobumsulwa obuphezulu.

Ngezicelo ezinomthamo omkhulu lapho ukubhidlika kwe-hydrogen kungeyona inkinga, i-C11000 inikeza inani elihle kakhulu. Ngezicelo ezibalulekile lapho ukuthembeka kubaluleke kakhulu, i-premium ye-C10200 ivame ukuba nesizathu.

Izicelo: Isikhathi Sokusebenzisa I-Alloy Ngayinye

I-C11000 ETP Copper — Izicelo Ezivamile

I-C11000 iyindlela yokusebenza embonini yethusi, esetshenziswa ezinhlobonhlobo zezinhlelo zokusebenza ezijwayelekile:

Izicelo Zikagesi

• Amabha amabhasi kagesi kanye nama-conductor
• Amaphaneli okushintsha kanye nokusabalalisa
• Ama-windings nama-coil e-transformer
• Amatheminali, izixhumi, nama-lugs
• Ama-magnet wire kanye nama-cable conductor
• I-foil yebhodi lesifunda eliphrintiwe (i-PCB)
• Ama-commutator namabhulashi

Izicelo Zokushisa

• Izinki zokushisa kanye nama-heat exchanger
• Ama-radiator nezinhlelo zokupholisa
• Izinto zokusetshenziswa kwe-interface ezishisayo

Ezezimboni kanye Nezakhiwo

• Uphahla kanye neshidi lokwakha
• Ipayipi lokufaka amapayipi kanye nepayipi
• Ama-gasket kanye nezivalo
• Imishini yokucubungula amakhemikhali
• Ukuphrinta imiqulu nama-anode
• Ama-radiator ezimoto

I-C10200 Ithusi Elingenawo Umoya-mpilo — Izicelo Ezivamile

I-C10200 igcinelwe izinhlelo zokusebenza lapho ubumsulwa, ukuthembeka, kanye nokusebenza ngaphansi kwezimo ezimbi kakhulu kubalulekile:

I-Vacuum kanye ne-High-Tech Electronics

• Amashubhu e-vacuum namashubhu e-electron
• Ama-Magnetron nama-klystron
• Izingxenye ze-particle accelerator
• Iziphazamisi ze-vacuum kanye ne-switchgear
• Izingxenye zegumbi eline-vacuum ephezulu kanye nama-gasket
• Izingxenye ze-microwave ne-RF
• Ama-waveguides kanye nezintambo ze-coaxial

I-semiconductorkanye ne-Microelectronics

• Ukupakisha kwe-semiconductor kanye namafreyimu e-lead
• Ama-electrode aqondile e-EDM (i-Electrical Discharge Machining)
• Izimpawu zengilazi kuya kwensimbi
• Izingxenye ze-transistor kanye nezintambo ze-lead
• Ukuxhumana kukagesi okuhlanzekile kakhulu

Imihlangano Ephakeme Yokushisa Nokushiswa

• Izingxenye ezidinga i-hydrogen brazing noma i-welding
• Izixhumi zikagesi ezishisa kakhulu
• Izinhlelo zokusebenza ze-Cryogenic (ukusebenza okuphezulu kakhulu kwezinga lokushisa eliphansi)
• Izinhlelo zegesi zezokwelapha (insizakalo yomoya-mpilo)

Umsindo kanye ne-Electronics Ezisezingeni Eliphezulu

• Izintambo zomsindo ezisezingeni eliphezulu kanye nokuxhumeka
• Amatheminali esipikha kanye nezigxobo zokubopha
• Izixhumi zomsindo ze-premium

Izinto Okucatshangwa Ngazo Ngemishini Ye-CNC Nge-Copper Alloys

Zombili i-C11000 ne-C10200 zinobuchwepheshe obuhle kakhulu bokusebenza, kodwa kunezinye izinto ezibalulekile okufanele uzicabangele mayelana nokusetshenziswa kwe-CNC machining:

Isilinganiso Sokungakwazi Ukusebenza

Zombili izinsimbi zinesilinganiso sokusebenza esingaba ngu-1.5%20-25% uma kuqhathaniswa nethusi elisebenza ngomshini okhululekile (C36000 = 100%)Nakuba kungezona izinto ezilula ukuzisebenzisa ngomshini, ngokuqinisekile ziyalawuleka ngamasu afanele.

Izici Zokusebenza Okuyinhloko Kwemishini

• Ukuqina okuphezulu:Zombili lezi zinsimbi zithambile kakhulu, ikakhulukazi esimweni esifakwe insimbi, okungabangela ukwakheka komphetho (BUE) kumathuluzi okusika.
• Ukwakheka kwe-chip:Ikhiqiza ama-chip amade, aqinile adinga ukuphathwa kahle kwama-chip.
• Ukuthambekela kokugabha:Ithusi livame ukuba nenyongo kanye nokugcotshwa, ikakhulukazi ngesivinini esiphansi sokusika.
• Ukuqhuba kwe-thermal:Ukushabalalisa ukushisa okuhle kakhulu kusiza ukugcina amazinga okushisa ephansi.

Amapharamitha Omshini Anconyiwe

Amathiphu Okusebenza Ngemishini C11000 kanye ne-C10200

1. Sebenzisa amathuluzi abukhali:Amathuluzi abuthakathaka abangela ukuqaqamba okukhulu kanye nokuphela okungekuhle kobuso. Gcina imiphetho yokusika ibukhali futhi icwebezelisiwe.
2. Isivinini sokusika esiphezulu:Isivinini esiphezulu sisiza ukunciphisa umkhawulo owakhiwe futhi sithuthukise ukuqeda ubuso.
3. Ukulawula i-chip:Sebenzisa ama-chip breaker noma i-coolant enomfutho ophezulu ukuphatha ama-chip ethusi amade, aqinile.
4. Ukubopha:Sebenzisa i-fixturing efanele ukuvimbela ukuphambuka kwezingxenye zomsebenzi — ithusi lithambile futhi lingagoba ngaphansi kwamandla okubopha.
5. Ukuqeda kobuso:Zombili lezi zinsimbi zingafinyelela ukuqedwa okuhle kakhulu kobuso (Ra 0.8-1.6 µm) ngamathuluzi afanele kanye nemingcele.
6. Ukuqina kobukhulu:Ithusi linomthamo ophezulu wokukhula kokushisa — lokhu kubangelwa ukusetshenziswa okubekezelelana kakhulu.

Qaphela Umshini Wokwenza Imishini: Kunomehluko omncane kakhulu ekusebenzeni kwemishini phakathi kwe-C11000 ne-C10200. Yomibili imishini iyafana, futhi ukukhetha phakathi kwayo kufanele kusekelwe ezidingweni zohlelo lokusebenza kunokuba kucatshangelwe ukusebenza kwemishini kuphela.

Ungakhetha Kanjani: C11000 noma C10200?

Sebenzisa lolu hlaka lwesinqumo ukukhetha i-alloy yethusi efanele yephrojekthi yakho:

Khetha i-C11000 ETP Copper Uma:

• ✓ Udinga ugesi omuhle kakhulu ngentengo ephansi kakhulu
• ✓ Uhlelo lwakho lokusebenza lusebenza ekushiseni kwegumbi noma emazingeni okushisa aphezulu ngokulingene
• ✓ Akudingeki ukushisela noma ukushisela umoya we-hydrogen
• ✓ Ukusebenza kahle kwe-vacuum akubalulekile
• ✓ Ukhiqiza izingxenye zikagesi noma ezishisayo ezinomthamo omkhulu
• ✓ Uhlelo lokusebenza luyinjongo evamile (amabha, izixhumi, ama-heat sink)

Khetha i-C10200 Ithusi Elingenayo I-Oxygen Uma:

• ✓ Ukufaka kwakho kuhilela ukushisela noma ukufaka i-brazing emoyeni we-hydrogen/we-reduction
• ✓ Udinga ukuhambisana ne-vacuum (izinhlelo ze-vacuum ephezulu noma ze-UHV)
• ✓ Ukushisa okuphezulu kakhulu kanye nokushisa kubalulekile
• ✓ Ingxenye izosebenza emazingeni okushisa aphezulu
• ✓ Udinga ukuthembeka okuphezulu kanye nengozi yokungabi bikho kwe-hydrogen
• ✓ Uhlelo lokusebenza luyi-semiconductor, i-aerospace, noma i-electronics ephezulu
• ✓ Kudingeka izivalo zeglasi zibe yinsimbi
• ✓ Ukusebenza kwe-Cryogenic kubalulekile

I-Matrix Yezinqumo Ezisheshayo

imibuzo ejwayelekile ukubuzwa

Q: Ingabe i-C11000 ifana nethusi elimsulwa?

A: I-C11000 ibhekwa njengethusi elihlanzekile ngokwezentengiselwano elinokuqukethwe kwethusi okungenani okungu-99.90%. Iqukethe inani elincane lomoya-mpilo (0.02-0.05%) elengezwa ngamabomu ngesikhathi sokukhiqiza. Nakuba ingeyona emsulwa ngokuphelele ngomqondo oqinile, ibizwa kabanzi ngokuthi "ithusi elihlanzekile" ngezinjongo zezimboni.

Q: Ingabe i-C11000 ingashintshwa?

A: Yebo, i-C11000 ingashintshwa kusetshenziswa izinqubo ezifana ne-TIG, i-MIG, kanye nokushintshwa kokumelana. Kodwa-ke, AKUFANELE ishiswe noma ifakwe i-hydrogen noma inciphise imimoya engaphezu kuka-370°C, njengoba lokhu kubangela ukubhidlika kwe-hydrogen. Ngokushintshwa komoya we-hydrogen, i-C10200 iyindlela efanele.

Q: Kusho ukuthini ukuthi "akukho oxygen" ku-C10200?

A: "Okungenawo umoya-mpilo" kusho ukuthi ithusi liqukethe ≤ 10 ppm (0.001%) we-oxygen, uma kuqhathaniswa ne-200-500 ppm ku-C11000. Lokhu kufezwa ngokuncibilikisa nokuphonsa ithusi endaweni engenawo umoya-mpilo. Ukungabikho komoya-mpilo kunikeza i-C10200 izakhiwo zayo ezinhle kakhulu zokushisela, i-vacuum, kanye nezinga lokushisa eliphezulu.

U: Ingabe umehluko wokuqhuba ugesi phakathi kwe-C11000 ne-C10200 ubalulekile?

A: Eziningi zezinhlelo zokusebenza ezijwayelekile, umehluko wokuqhuba we-1-2% awunamsebenzi. Kodwa-ke, ezinhlelweni zamandla aphezulu, izinhlelo zokusebenza ze-RF ezivame kakhulu, noma imishini yokulinganisa ngokunemba, ngisho nalo mehluko omncane ungaba nenjongo. Isizathu esiyinhloko sokukhetha i-C10200 ngokuvamile akusikho ukuqhuba kwe-hydrogen kodwa kunalokho ukuzivikela kwayo ekuqhekekeni kwe-hydrogen kanye nokuhambisana kwe-vacuum.

U: Ngingakwazi yini ukufaka i-C11000 esikhundleni se-C10200 (noma okuphambene nalokho)?

A: Ngokuvamile ungashintsha i-C11000 nge-C10200 njengokuthuthukisa — i-C10200 izosebenza kahle noma kangcono ngazo zonke izindlela, kodwa ngezindleko eziphakeme. Kodwa-ke, AKUFANELE ufake i-C10200 nge-C11000 ezicelweni ezihilela i-hydrogen, i-vacuum, noma ukushisela okushisa okuphezulu, njengoba lokhu kungaholela ekwehlulekeni okukhulu.

Q: Yiziphi izincazelo ze-ASTM zalezi zingxube?

A: Zombili lezi zinhlobo ze-alloy zimbozwe yizincazelo eziningana ze-ASTM:
C11000: I-ASTM B152 (ishidi/ipuleti), i-ASTM B1/B2 (induku/ibha), i-ASTM B3 (intambo), i-ASTM B370 (ishidi lokwakha)
C10200: I-ASTM B152 (ishidi/ipuleti), i-ASTM B187 (induku/ibha), i-ASTM B272 (umcu), i-ASTM B110 (ibha yebhasi)

Q: Yisiphi i-alloy yethusi engcono kakhulu ekusetshenzisweni kwe-CNC?

A: Zombili i-C11000 ne-C10200 zinobuchwepheshe bokusebenza obufana kakhulu. Akukho okulula kakhulu noma okunzima kakhulu ukubusebenzisa kunobunye. Ukukhetha kufanele kusekelwe ezidingweni zakho zohlelo lokusebenza (ukuqhuba, ukushisela, i-vacuum, njll.) kunokuba kucatshangelwe ngobuchwepheshe bokusebenza. Uma ubuchwepheshe bokusebenza buyinto oyikhathalela kakhulu, cabanga ngama-copper asebenza ngokukhululeka njenge-C14500 (ithusi le-tellurium) esikhundleni salokho.

Isiphetho

Isifinyezo: Ithusi le-C11000 vs C10200

Ithusi le-C11000 ETPiyindinganiso yemboni yezinhlelo zokusebenza zikagesi nezokushisa ezijwayelekile. Inikeza ukuhanjiswa okuhle kakhulu ngentengo engabizi futhi ifaneleka kakhulu ezinhlotsheni eziningi zezicelo zethusi lapho kungadingeki khona ukuvezwa kwe-hydrogen emazingeni okushisa aphezulu noma ukusebenza kwe-vacuum.

Ithusi elingenawo umoya-mpilo le-C10200iyisinqumo esingcono kakhulu sezinhlelo zokusebenza ezibalulekile. Okuqukethwe kwayo okungenawo umoya-mpilo kwenza ingathinteki ekuqhekekeni kwe-hydrogen, ifanele izindawo zokuhlanza umoya, futhi ilungele izinhlelo zokusebenza ezishisa kakhulu nezisebenzisa kakhulu ukushisela. Nakuba ibiza kakhulu ngo-15-25%, inikeza ukuthembeka okungenakuqhathaniswa lapho ukwehluleka kungeyona inketho.

Iphuzu elibalulekile:Khetha i-C11000 ukuze isetshenziswe ngendlela engabizi kakhulu nenenjongo evamile. Khetha i-C10200 uma udinga ukuthembeka okuphezulu ezindaweni ezibucayi noma lapho kudingeka ukuhambisana kwe-hydrogen welding/vacuum.

Idatha yezinto ezibonakalayo isekelwe ezicacisweni ze-ASTM kanye nezinkomba ezijwayelekile zomkhakha. Ukuze uthole izidingo ezithile zephrojekthi, xhumana nonjiniyela wezinto ezibonakalayo noma xhumana nethimba lethu lobuchwepheshe.

Umbhali:UCoco Meng

Usuku: Julayi 27, 2026

E-mail: coco@k-tekmachining.com

Iwebhu: www.k-tekmachining.com